Kulingana na aina ya bidhaa, inaweza kugawanywa katika

The characteristics of 5083 aloi ya alumini ya chuma

5083 aloi ya alumini ina uso mzuri baada ya matibabu ya anodized. Utendaji mzuri wa kulehemu wa arc.

Kipengele kikuu cha aloi katika 5083 aloi ni magnesiamu, which has good antirust and corrosion resistance and weldability, kazi nzuri ya baridi, still good plasticity in semi-cold work hardening, plastiki ya chini katika ugumu wa kazi ya baridi, fatigue resistance strength, poor machinability and polishability. As well as medium strength. Upinzani wa kutu wa 5083 alloy is widely used in maritime applications, kama vile meli, as well as automobiles, aircraft welded parts, and subway light rail. It is also used in the manufacture of aircraft fuel tanks, mabomba ya mafuta, na sehemu za chuma za karatasi kwa vyombo vya usafiri na meli, vyombo, mabano ya taa za barabarani na rivets, bidhaa za vifaa, nyumba za umeme, na kadhalika.

Zaidi ya hayo, the alloy needs to be strictly fireproof and cannot be strengthened by heat treatment.

chemical composition of 5083 aloi ya alumini ya chuma

  • Na ( Silikoni ): ≤ 0.4
  • Cu ( Shaba ): ≤ 0.1
  • Mg ( Magnesiamu ): 4.0 - 4.9
  • Zn ( Zinki ): ≤ 0.25
  • Mhe ( Manganese ): 0.4 - 1.0
  • Cr ( Chromium ): 0.05 - 0.25
  • Fe ( Chuma ): ≤ 0.4
  • Ya ( Titanium ): ≤ 0.15
  • Nyingine: ≤ 0.05
  • Jumla nyingine: ≤ 0.15
  • Al ( Alumini ): remaining all

The applications of 5083 aloi ya alumini ya chuma

5083 metal aluminum alloy is an Al Mg Si alloy with a wide range of applications. Especially in the construction industry, it is a promising alloy. Upinzani mzuri wa kutu, weldability bora, kazi nzuri ya baridi na nguvu ya kati. Kipengele kikuu cha aloi ya 5083 ni magnesiamu, ambayo ina umbile nzuri, upinzani wa kutu, weldability na nguvu kati. Wakati huo huo, 5083 also belongs to Al Mn alloy, which is a widely used antirust aluminum. Aloi hii ina nguvu ya juu, hasa nguvu ya uchovu: plastiki ya juu na upinzani wa kutu, haiwezi kuimarishwa na matibabu ya joto, good plasticity during semi cold work hardening, plastiki ya chini wakati wa ugumu wa kazi ya baridi, upinzani mzuri wa kutu, weldability nzuri, ufundi duni na polishing.

5083 metal aluminum alloy is mainly used for 5056-h32 aluminum alloy plate manufacturers requiring high plasticity and good weldability, low load parts working in liquid or gas media, kama sanduku la barua, petroli au mfereji wa mafuta ya kulainisha, sehemu za chuma za karatasi za magari ya trafiki na meli, vyombo, taa za barabarani inasaidia na rivets, bidhaa za vifaa, electric shell, na kadhalika

Mainly used for the requirement of high plasticity and good weldability, low load parts working in liquid or gas medium, such as oil tanks, gasoline or lubricating oil conduits, liquid containers and other small load parts made by deep drawing: wire is used to make rivets.

Car trunk is generally also called car trunk, consisting of car rear body frame, and the spare tire cover located in the middle of the rear body frame and the trunk lid at the top. With the development of car lightweighting, the trunk lid as a car opening and closing part module is an important part of car lightweighting, which can be made of 5083 aluminum alloy and 5182 aloi ya alumini.

Aluminum alloy for car trunk lid

Aluminum alloy for car luggage compartment cover manufacturer, the products of aluminum alloy for car luggage compartment mainly include 5182 sahani ya alumini, 5083 sahani ya alumini ya aloi, and undertake orders of 8-5000 tons of aluminum plate for global export.

Advantages of aluminum alloy for car luggage cover

  1. Abrasion resistance, upinzani wa kutu, good elasticity, good impact resistance
  2. Small density, reduce the weight of the body, reduce the amount of fuel consumption
  3. Aluminum recycling value is high, its regeneration performance is higher than any metal, ulinzi wa kiuchumi na mazingira.