5083 金属アルミニウム合金

製品タイプに応じて, それは次のように分けることができます

• 5083 合金金属アルミニウムシートプレート
• 5083 合金金属アルミニウムコイル

The characteristics of 5083 金属アルミニウム合金

5083 aluminum alloy has beautiful surface after anodized treatment. Good arc welding performance.

The main alloying element in 5083 alloy is magnesium, which has good antirust and corrosion resistance and weldability, 良好な冷間加工性, still good plasticity in semi-cold work hardening, low plasticity in cold work hardening, fatigue resistance strength, poor machinability and polishability. As well as medium strength. The corrosion resistance of 5083 alloy is widely used in maritime applications, 船などの, as well as automobiles, aircraft welded parts, and subway light rail. It is also used in the manufacture of aircraft fuel tanks, 燃料パイプ, 輸送車両・船舶用板金部品, 楽器, 街路灯ブラケットとリベット, ハードウェア製品, 電気ハウジング, 等.

加えて, the alloy needs to be strictly fireproof and cannot be strengthened by heat treatment.

chemical composition of 5083 金属アルミニウム合金

• そして ( シリコン ): ≤ 0.4
• 銅 ( 銅 ): ≤ 0.1
• マグネシウム ( マグネシウム ): 4.0 - 4.9
• 亜鉛 ( 亜鉛 ): ≤ 0.25
• ん ( マンガン ): 0.4 - 1.0
• Cr ( クロム ): 0.05 - 0.25
• 鉄 ( 鉄 ): ≤ 0.4
• の ( チタン ): ≤ 0.15
• 他の: ≤ 0.05
• Other total: ≤ 0.15
• アル ( アルミニウム ): remaining all

The applications of 5083 金属アルミニウム合金

5083 metal aluminum alloy is an Al Mg Si alloy with a wide range of applications. Especially in the construction industry, it is a promising alloy. 優れた耐食性, 優れた溶接性, 良好な冷間加工性と中程度の強度. 主な合金元素は、 5083 マグネシウムです, 成形性が良いもの, 耐食性, 溶接性と中強度. 同時に, 5083 also belongs to Al Mn alloy, which is a widely used antirust aluminum. この合金は高い強度を持っています, 特に疲労強度: 高い可塑性と耐食性, 熱処理では強化できない, good plasticity during semi cold work hardening, 冷間加工硬化時の可塑性が低い, 良好な耐食性, 良好な溶接性, 機械加工性と研磨性が低い.

5083 metal aluminum alloy is mainly used for 5056-h32 aluminum alloy plate manufacturers requiring high plasticity and good weldability, low load parts working in liquid or gas media, such as mailbox, ガソリンまたは潤滑油の導管, 交通車両や船舶の板金部品, 楽器, 街路灯のサポートとリベット, ハードウェア製品, electric shell, 等

Mainly used for the requirement of high plasticity and good weldability, low load parts working in liquid or gas medium, such as oil tanks, gasoline or lubricating oil conduits, liquid containers and other small load parts made by deep drawing: wire is used to make rivets.

Car trunk is generally also called car trunk, consisting of car rear body frame, and the spare tire cover located in the middle of the rear body frame and the trunk lid at the top. With the development of car lightweighting, the trunk lid as a car opening and closing part module is an important part of car lightweighting, which can be made of 5083 aluminum alloy and 5182 アルミニウム合金.

Aluminum alloy for car trunk lid

Aluminum alloy for car luggage compartment cover manufacturer, the products of aluminum alloy for car luggage compartment mainly include 5182 アルミ板, 5083 合金アルミニウム板, and undertake orders of 8-5000 tons of aluminum plate for global export.

Advantages of aluminum alloy for car luggage cover

1. Abrasion resistance, 耐食性, good elasticity, good impact resistance
2. Small density, reduce the weight of the body, reduce the amount of fuel consumption
3. Aluminum recycling value is high, its regeneration performance is higher than any metal, 経済的および環境保護.

ファーウェイのアルミニウムの見積もり