1050 aluminium spoel
Ⅰ-een: 1050 aluminum coil introduction
1050 pure aluminum coil belongs to 1000 serie aluminium spoel, which is the commercially pure wrought family with a purity of 99.5% Al. It also belongs to the 1000 serie aluminiumlegering, which has better correction resistance than other alloy series. In de 1050 aluminium spoel, in addition to the component Al, 0.4% Fe is added, Dus 1050 aluminum alloy also has high conductivity.
In het algemeen, 1050 aluminium coil properties exhibit high plasticity, strong corrosion-resistance, and excellent electrical and thermal conductivity, but the strength of 1050 aluminum alloy is low. Hier, Huawei has 18 years of 1050 aluminum coil production experience and is able to produce and supply high-quality 1050 aluminium spoel. In aanvulling, different temper can be provided, such as O (gegloeid), H12, H14, H18, enzovoort.
1050 aluminum coil specification chart
Toepassing van 1050 plain aluminum coil roll
1050 aluminum coil has high ductility and a highly reflective finish. Daarnaast, 1050 aluminum coil is non-heat treatment series is produced in extruded sections. It has excellent cold workability, braze-ability, and solder-ability, and it is strengthened by cold working. Echter, 1050 aluminum coil has low mechanical strength compared to more significantly alloyed metals. All of these characteristics make 1050 aluminum coil well suited to chemical and electrolytic brightening but not in casting. Als laatste maar daarom niet minder belangrijk, moderate strength and good anodizing quality enable our products to have a vast application.
Popular application: dakbedekking, gutter, ps panel, enz
Parameters Of 1050 aluminium spoelen
Gelijkwaardige naam
A1050, 1050A, aa1050, 1050aa, al1050, al1050a, A 1050, aa 1050, jis a1050p, al1050 class, aw1050, en1050 grade etc
Woedeaanval
Zachte HO (h0), H11, H12, H13, H14, H15, H16, H17, H18, H19, H20, H21, H22, H23, H24, H25, H26, H27, H28, H29, H30, H31, H32, H33, H34, H35, H36, H37, H38, H39, H46, H48, H111, H112, H114, H116, H131, H321 enz
Dikte: 0.5mm, 0.6mm, 0.8mm, 1mm, 2mm enz
Oppervlaktebehandeling: color coated, PE prepainted, geanodiseerd, PVDF pre-painted, poedercoating, mirror, polysurlyn laminated, reliëf stucwerk, enz
Chemical properties of 1050 aluminium spoel
| C | En | Mn | P | S | In | Cr | Cu |
|---|---|---|---|---|---|---|---|
| 0.47~0.55 | 0.17~0.37 | 0.50~0.80 | ≤ 0.035 | ≤ 0.035 | ≤ 0.30 | ≤ 0.15 | ≤ 0.25 |
1050 aluminum coil processing technology
Warmtebehandelingsproces: oil quenching and tempering. The strength of this kind of wire is not as good as that of a lead bath, but the performance is uniform and the cost is lower. After cold coil forming, stress relief is carried out. Pull to specified size, and then annealing. After softening, the mechanical properties can be obtained only after quenching and tempering at medium temperature.