1050 алюминий катушкасы
Ⅰ-а: 1050 aluminum coil introduction
1050 pure aluminum coil belongs to 1000 series aluminum coil, which is the commercially pure wrought family with a purity of 99.5% Әл. It also belongs to the 1000 сериялы алюминий қорытпасы, which has better correction resistance than other alloy series. ішінде 1050 алюминий катушкасы, in addition to the component Al, 0.4% Fe is added, солай 1050 aluminum alloy also has high conductivity.
Жалпы алғанда, 1050 алюминий coil properties exhibit high plasticity, strong corrosion-resistance, and excellent electrical and thermal conductivity, but the strength of 1050 aluminum alloy is low. Мұнда, Huawei has 18 years of 1050 aluminum coil production experience and is able to produce and supply high-quality 1050 алюминий катушкасы. Сонымен қатар, different temper can be provided, сияқты О (күйдірілген), H12, H14, H18, және т.б.
1050 aluminum coil specification chart
қолдану 1050 plain aluminum coil roll
1050 aluminum coil has high ductility and a highly reflective finish. Сонымен қатар, 1050 aluminum coil is non-heat treatment series is produced in extruded sections. It has excellent cold workability, braze-ability, and solder-ability, and it is strengthened by cold working. Дегенмен, 1050 aluminum coil has low mechanical strength compared to more significantly alloyed metals. All of these characteristics make 1050 aluminum coil well suited to chemical and electrolytic brightening but not in casting. Ақырғы бірақ соңғы емес, moderate strength and good anodizing quality enable our products to have a vast application.
Popular application: шатыр жабыны, gutter, ps panel, т.б
Parameters Of 1050 алюминий катушкалар
Баламалы атау
A1050, 1050а, aa1050, 1050аа, al1050, al1050a, а 1050, аа 1050, jis a1050p, al1050 class, aw1050, en1050 grade etc
Температура
Жұмсақ HO (h0), H11, H12, H13, H14, H15, H16, H17, H18, H19, H20, H21, H22, H23, H24, H25, H26, H27, H28, H29, H30, H31, H32, H33, H34, H35, H36, H37, H38, H39, H46, H48, H111, H112, H114, H116, H131, H321 т.б
Қалыңдығы: 0.5мм, 0.6мм, 0.8мм, 1мм, 2мм т.б
Беттік өңдеу: түсті боялған, PE prepainted, анодталған, PVDF pre-painted, ұнтақ жабыны, айна, polysurlyn laminated, бедерлі сылақ, т.б
Chemical properties of 1050 алюминий катушкасы
| C | Және | Mn | P | С | жылы | Cr | Cu |
|---|---|---|---|---|---|---|---|
| 0.47~0.55 | 0.17~0.37 | 0.50~0.80 | ≤ 0.035 | ≤ 0.035 | ≤ 0.30 | ≤ 0.15 | ≤ 0.25 |
1050 aluminum coil processing technology
Термиялық өңдеу процесі: oil quenching and tempering. The strength of this kind of wire is not as good as that of a lead bath, but the performance is uniform and the cost is lower. After cold coil forming, stress relief is carried out. Pull to specified size, and then annealing. After softening, the mechanical properties can be obtained only after quenching and tempering at medium temperature.