1050 アルミコイル
Ⅰ-a: 1050 アルミコイルの紹介
1050 pure aluminum coil belongs to 1000 シリーズアルミコイル, which is the commercially pure wrought family with a purity of 99.5% アル. It also belongs to the 1000 シリーズアルミニウム合金, which has better correction resistance than other alloy series. で 1050 アルミコイル, in addition to the component Al, 0.4% Fe is added, それで 1050 aluminum alloy also has high conductivity.
一般的に, 1050 アルミニウム coil properties exhibit high plasticity, strong corrosion-resistance, and excellent electrical and thermal conductivity, but the strength of 1050 aluminum alloy is low. ここ, Huawei has 18 years of 1050 aluminum coil production experience and is able to produce and supply high-quality 1050 アルミコイル. 加えて, different temper can be provided, such as O (annealed), H12, H14, H18, 等々.
1050 aluminum coil specification chart
の適用 1050 plain aluminum coil roll
1050 aluminum coil has high ductility and a highly reflective finish. その上, 1050 aluminum coil is non-heat treatment series is produced in extruded sections. It has excellent cold workability, braze-ability, and solder-ability, and it is strengthened by cold working. しかし, 1050 aluminum coil has low mechanical strength compared to more significantly alloyed metals. All of these characteristics make 1050 aluminum coil well suited to chemical and electrolytic brightening but not in casting. 最後になりましたが、重要なことです, moderate strength and good anodizing quality enable our products to have a vast application.
Popular application: 屋根ふき, gutter, ps panel, 等
Parameters Of 1050 アルミコイル
相当する名前
A1050, 1050ある, aa1050, 1050ああ, al1050, al1050a, ある 1050, ああ 1050, jis a1050p, al1050 class, aw1050, en1050 grade etc
気性
ソフトHO (h0), H11, H12, H13, H14, H15, H16, H17, H18, H19, H20, H21, H22, H23, H24, H25, H26, H27, H28, H29, H30, H31, H32, H33, H34, H35, H36, H37, H38, H39, H46, H48, H111, H112, H114, H116, H131, H321など
厚さ: 0.5mm, 0.6mm, 0.8mm, 1mm, 2mmなど
表面処理: カラーコーティングされた, PE prepainted, 陽極酸化された, PVDF pre-painted, 粉体塗装, mirror, polysurlyn laminated, エンボス漆喰, 等
Chemical properties of 1050 アルミコイル
| C | そして | ん | P | S | で | Cr | 銅 |
|---|---|---|---|---|---|---|---|
| 0.47~0.55 | 0.17~0.37 | 0.50~0.80 | ≤ 0.035 | ≤ 0.035 | ≤ 0.30 | ≤ 0.15 | ≤ 0.25 |
1050 aluminum coil processing technology
Heat treatment process: oil quenching and tempering. The strength of this kind of wire is not as good as that of a lead bath, but the performance is uniform and the cost is lower. After cold coil forming, stress relief is carried out. Pull to specified size, and then annealing. After softening, the mechanical properties can be obtained only after quenching and tempering at medium temperature.
Aluminum coil production line
ファーウェイのアルミニウムの見積もり
| 日付 | LME | LME 週間価格 | 2023-04 LME平均 | 2023-04 SMM平均 |
| 2023-05-03 | 2330$ | 2333.3$ | 2341.00$ | 2712.08$ |
| 2023-05-02 | 2353$ | |||
| 2023-04-28 | 2342$ | |||
| 2023-04-27 | 2302$ | |||
| 2023-04-26 | 2339.5$ | |||
| 注意事項
1. 価格は次で更新されます 10:00 平日です. |
||||