1200 aluminum alloy sheet introduction
1200 aluminum plate is the industrial pure aluminum, жоғары пластикалық, коррозияға төзімділік, электр және жылу өткізгіштік, бірақ күші төмен, heat treatment can not be strengthened, machinability is not good.
1200 алюминий парағы
1200 aluminum sheet plate chemical composition
| Қорытпа | Және | Фе | Cu | Mn | Mg | Cr | Zn | Оның | жылы | Басқалар | Әл |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 1200 | ≤0,15 | ≤0,25 | ≤0,05 | 0.10 | - | - | ≤0,10 | ≤0,05 | - | ≤0,05 | 99.00 |
1200 aluminium-sheets
1200 aluminum sheet plate mechanical properties
| Tensile strength σb | Elongation δ10 | Elongation δ5 | Ескерту |
|---|---|---|---|
| 75～105MPa | ≥22% | ≥25% | Longitudinal mechanical properties of tubes at room temperature |
1200 aluminum sheet features
The 1200 aluminum alloy plate is a typical hard aluminum alloy in the aluminum-copper-magnesium series. Its composition is relatively reasonable and its comprehensive performance is better. Many countries produce this alloy, which is the largest amount of duralumin. The characteristics of this alloy are high strength, certain heat resistance, and can be used as working parts below 150°C.
1200 сатуға арналған алюминий парағы
At temperatures above 125°C, the strength of 1200 aluminum alloy is higher than that of 7075 алюминий қорытпасы. The forming properties are relatively good in the hot state, annealed and newly quenched state and the heat treatment strengthening effect is remarkable, but the heat treatment process requirements are strict. The corrosion resistance is poor, but it can be effectively protected by cladding with pure aluminum; it is easy to produce cracks during welding, but it can be welded or riveted by a special process. Widely used in aircraft structures, тойтармалар, truck hubs, propeller components, and various other structural parts.