Wholesale aluminum radiant heat transfer floor PEX spreader plate for underfloor

アルミニウム製の熱伝達プレートが根太の間に設置され、下地床の底部全体に熱伝達を提供します。. アルミニウムに形成された丸いチャネルがチューブをぴったりと囲み、チューブからアルミニウムプレートを通した温水による熱伝達により、伝達される熱量が大幅に増加し、床全体に均一に分配されます。.

Parameters of aluminum heat transfer plate

相当する名前: hydronic aluminum transfer plate ( パネル ), aluminum spreader plate, aluminum radiant plate, heat diffusion plate, thermal transfer plate, Aluminum heat emission fins, aluminum heat diffuser plates etc
厚さ: 0.4mm, 0.5mm, .06mm, 0.8mm, 1.6mmなど
幅: 125mm, 127mm, 128mm, 230mm, 317mm, 390mm, 610mmなど
長さ: 609mm, 1219mm, 2438mmなど
Shape: Omega

According to the grove omega shape number, それは次のように分けることができます

Single grove aluminum heat transfer plate ( 1U )
Double groves aluminum heat transfer plate ( 2U )
Three groves aluminum heat transfer plate ( 3U )

Features of aluminum heat transfer plate

オメガ型 1/2": スナップインできます 5/8" 設置中のPEXパイプ. このチャネル形状は、U 字型プレートよりもチューブとの接触が多くなり、熱伝達が向上します。.

0.016 厚いアルミニウム 4.5" 広い

輻射式床暖房システムの効率と応答時間を向上させます.
高品質アルミニウム伝熱プレート 1/2" PEX チューブ
素早い熱伝達を実現する高品質アルミニウムプレート
許可する 1-2 拡張用のプレート間の間隔はインチ

Comparison of floors with and without aluminum heat transfer plate

アルミ伝熱板なし

アルミ伝熱板を使わずにステープル留め. これらのシステムはサスペンドチューブシステムよりも低温で動作しますが、表面の導電性が低いためプレートタイプシステムよりも高温になります。.

アルミ伝熱板を使用

伝熱プレートでホッチキスで留める. これらのシステムは、接触表面積を拡大するアルミニウムフィンを追加する場合よりも低い温度で動作します。.

当社のプレートはオメガ型です (ない "V" または "U"-他人と同じような形をした) 取り付け時に PEX パイプをスナップインできるようにします, はるかに速く簡単になります. このチャネル形状は、U 字型プレートよりもチューブとの接触が多くなり、熱伝達が向上します。.

輻射式床暖房システムの効率と応答時間を向上させます.
時間と労力を節約 - オメガ型プレートにより 1 人での取り付けが可能.

快適:

輻射熱システムの快適さに匹敵するものはありません. このテクノロジーは、太陽が体を温めるのとほぼ同じように機能します。. 熱は床から均一に放出されます。, しかし、特定の空間内の物体を加熱しているため上昇しません, 空気ではない. 自然な雰囲気で、冬でも裸足で歩きながら温かい椅子と暖かい床を楽しめます。.

クリーン:

アルミニウム伝熱プレートシステムはほぼ低アレルギー性です. 強制的に空気を送り込むわけではないので、, 暖房システムによる花粉の飛散を心配する必要はありません, 家の中のほこりやその他のアレルゲン.

エネルギー効率が高い:

概して, ベースボード加熱や強制空気加熱よりも効率的です。. 強制空冷あり, まで 30 熱のパーセントはダクトだけによって失われます. また, 熱い空気が上昇します. したがって, 建物の外壁を熱風で加熱する場合, 実際の居住空間に到達するまで、その空間を天井から下に熱風で満たす必要があります。. 輻射熱で, 天井が高いほど, 比較すると効率が向上します.

ささやき静か:

ブロワーなし, 騒々しいファンはいません, そして家は平和です.

魅力的:

この床暖房システムは不便な床と壁のレジスターを排除します。.

ゾーニング:

アルミニウム伝熱プレートシステムはゾーニングが容易で、複数のサーモスタットを使用して部屋間の温度制御を実現します。.

多用途性:

アルミニウム伝熱プレートは、液体を加熱するためにさまざまな燃料源を使用できます。, 太陽熱温水器を含む, 地熱ヒートポンプ, 高効率ガスボイラー, 木材ガス化ボイラーまたは石油ボイラー.

このタイプのシステムの上には、次のタイプの床材を設置できます。:

釘打ちの硬材
浮遊広葉樹
加工広葉樹
接着式木製床材
カーペット (広幅織機またはタイル)
ビニール (シートまたはタイル)
セラミックタイル
Ceiling
Between the floor joists to provide heat transfer across the bottom of the plywood.

Hot selling countries

カナダ, Britain, オーストラリア, 等

Pex tubing heat transfer plates

Pex Tubing Heat Transfer Plates are formed aluminum plates specifically designed to pro- vide excellent heat transfer between radiant heating pipes and floors or other surfaces.

Pex Tubing Heat Transfer Plates are typically used when installing radiant tubing under existing floorsorin new installations with wood or other floor materials to be placed on top of the floor base. They may also be used to transfer heat to various other mechanically secure surfaces in a wall or ceiling installation.

Pex Tubing Heat Transfer Plates are a critical component of a properly designed radiant system increasing the efficiency and the reaction time of the system.

Good radiant heating is done at low water temperatures and in the case of staple-up, that means with plates.

Radiantec heat transfer plates

HEAT TRANSFER – The purpose of your radiant heating system will be to make heat in the form of warm water (in an efficient manner, we hope) and then transfer that heat to your floor. Some process must take that heat away from the tubing and apply it to the underside of the floor so that the floor can heat the area above. Aluminum is a material that transfers heat exceptionally well but it is expensive, and its use should be carefully balanced against other methods of doing the same thing, and its application should be optimized for performance and cost effectiveness.

NO ALUMINUM vs. FULL COVERAGE OF ALUMINUM – Controlled experiments have shown that covering the tubing with medium/thin gauge aluminum plates causes the system to put out about 60% more heat when operated at the same temperature.

If you use no aluminum at all, you must either raise temperature of the fluid in the tubes to a very high level, use more tubing, or both. It is not desirable to operate plastic heat exchanger tubing at high temperatures for reasons of safety, efficiency and service life.

OMEGA Heat Transfer Plates

An efficient method to distribute radiant heat from PEX tubing.

HWALU OMEGA Heat Transfer Plates offer an efficient method of distributing radiant heat from PEX tubing. Made in China from a mill finish aluminum. The channel is a wrap around omega shap (Ω) for a snug fit that holds the tubing in place very effectively in above floor systems such as the RHT Floor Panel System.

Extruded aluminum heat transfer plates

Extruded aluminum heat transfer plate for 3/8” or 1/2” PEX tubing in the same plate. DuoTrack is 48” long by 3.75” wide with pre-punched holes featuring a double groove for two sizes of PEX tubing. This reduces inventory, space and cost.

Aluminum radiant floor heat transfer plates

Aluminum radiant floor heat transfer plates are necessary for most radiant heating installations that are not encased in concrete. They improve the conductivity of heat out of the radiant tubing and increase the surface area of the system to speed heat transfer to the building.

Radiant floor heating systems like to tout that they are the "most efficient" method of heating a home. The high efficiency of radiant systems only happen due to the low required water temperatures to satisfy the heating load. So the lower the required water temperature to heat your home the more energy savings you will enjoy. The right heat transfer plate can mean money in your pocket.

Radiant heat aluminum transfer plates

放射熱伝達プレートはパイプとパネルの間に 270 度の接触を提供します, より高い熱伝導率を実現, アルミパネルは軽量です, 設置重量がちょうどの場合 1.5 ポンド/平方フィート, 下地床の構造補強の必要性が減り、応答時間が短縮されます。. これらの金型成形アルミニウムヒートプレートはグリッドモジュールにはめ込み、チューブから床への熱の伝導を助けます。. 設置が簡単エネルギーコストを削減快適性が向上ステープルアップシステムでの使用に便利

Under floor radiant heat transfer plates

Aluminum Underfloor Heating Plates are used to get even heat distribution as well as reduce supply temperature by 30-40% and save on heating bills. Lower water temperature also means less damage to the flooring from excessive heat.

HWALU Aluminum Underfloor Heating Plates are formed aluminum plates specifically designed to pro- vide excellent heat transfer between radiant heating pipes and floors or other surfaces.

Aluminum Underfloor Heating Plates are typically used when installing radiant tubing under existing floorsorin new installations with wood or other floor materials to be placed on top of the floor base. They may also be used to transfer heat to various other mechanically secure surfaces in a wall or ceiling installation.

Increases heat transfer by over 30%

C-Channel design for better tubing contact and holding tubes in place

Precise thickness to optimize efficiency - thicker than the other guys!

Lower water temperatures

Lower heating bills

Great for retrofits and new construction

HWALU heat transfer plates are a critical component of a properly designed radiant system increasing the efficiency and the reaction time of the system.

Aluminum heat emission fins

Aluminum heat emission fins are used in “staple up systems” where the floor is warmed by installing tubing below the floor. それから, the heat transfer plates wrap around the tube and attach to the bottom of the floor by using a staple gun.

Aluminum heat emission fins perform three important functions:

To help to carry heat away from the tubing and distribute it through the joist space and into the floor (Heat transfer).

They support the Pex tubing.

They greatly reduce downward heat loss (backloss).

Many people ask us how the aluminum heat emission fins should be installed. To start with, you can use these rule of thumb guidelines:

If heat loss downward (backloss) is entirely wasted, cover the tubes entirely and insulate well. Unheated basements and crawl spaces are a couple of examples. If heat loss downward is useful to another space, then a reduction in aluminum by half should be considered.

The tubing should be covered entirely if the flooring material is thick or carpeted.

If low operating temperatures are desired, as for solar heating applications or for very high efficiency, cover the tubing entirely.

If there is any area that requires more heat than another (baths/greatrooms), the tubing should be covered entirely.

Best radiant heat transfer plates

Advantage Of best radiant heat transfer plates

これらの金型成形アルミニウムヒートプレートはグリッドモジュールにはめ込み、チューブから床への熱の伝導を助けます。.

They're also used in staple-up systems to secure PEX tubing to the underside of the sub-floor to maintain contact between the tubing and the sub-floor.

Excellent way to transfer heat when used with either 1/2 in or 5/8 in PEX tubing

取り付けが簡単

Reduces energy cost

Increases comfort

Convenient for use in staple up systems

Applications Of Aluminum Heat Transfer Products

Under the Sub-floor installation - Between Floor Joist - Engineered Floor Boards - Between plywood installation (Sandwich Installation)

Huawei aluminum provide you best radiant heat transfer plates

hydronic heat transfer plates

hydronic heat transfer plates offer a number of advantages:

They allow for a more even heat distribution across the flooring surface if compared to staple-up tubing installation.

They serve as a support for PEX tubing and eliminate the need for additional installation accessories.

They allow for a lower fluid supply temperature, thus increasing the radiant heating system’s efficiency and reducing the costs of heating.

Stamped Heat Transfer Plates are a thinner, and are commonly used in sandwich-type radiant floors, where PEX tubing is placed between the finished floor (つまり. laminate, hardwood, 等) and the subfloor. These plates are wide and short, which makes them ideal for such projects and allows for more versatility in installation.

The following image illustrates the heat transfer process during joist space installation using heat transfer plates. The image speaks for itself and gives very good reasons to consider using the heat transfer plates wherever it is possible.

HWALU Radiant Aluminum Heat Plates

Radiant Aluminum Heat Plates provide 270-degree contact between the pipe and the panel, より高い熱伝導率を実現

This design results in better directional efficiency with reduced downward heat transfer

Panels are only 5/8 で. (16 mm) thick minimizing need to change construction techniques

アルミパネルは軽量です, 設置重量がちょうどの場合 1.5 ポンド/平方フィート, 下地床の構造補強の必要性が減り、応答時間が短縮されます。

90% lighter than a typical overpour

Radiant Aluminum Heat Plates are necessary for most radiant heating installations that are not encased in concrete. They improve the conductivity of heat out of the radiant tubing and increase the surface area of the system to speed heat transfer to the building.