Parameters Of aluminum tread plate.
- 相当する名前: ダイヤモンドアルミニウムプレート, アルミ市松シート ( チェッカープレート ), アルミ市松模様シート ( チェックプレート, チェックプレート ), durbar plates
- 合金: 1050, 1100, 3003, 3103, 5052, 5083, 5754, 6061, 6082 等
- テクスチャ: 1つのバー, 2本のバー, 3本のバー, 5本のバーなど
| 1xxxシリーズ | 1050, 1060, 1070, 1100 |
| 3xxxシリーズ | 3003 |
| 5xxxシリーズ | 5052, 5754 |
| 6xxxシリーズ | 6061, 6063 |
| 気性 | H24, H32, H112 |
| 厚さ | 0.8mm - 12.7mm |
| 幅 | 100mm～2300mm |
| 長さ | under 12000mm |
| Hot Sell Sizes | 4x8', 1000×2000mm, 1219×2438mm, 1220×2440mm, 1500×3000mm |
| 表面処理 | 黒 |
Black aluminum diamond plate / チェッカープレート.
Black aluminum tread plate is a cost-effective solution for anti-skid and corrosion-resistant applications. It has a wide range of applications and can be seen in many occasions. Aluminum treads can be used as fenders, 着る (kick) boards, デッキ, 階段の踏み板, walkways, load areas, skirting boards, 床, vehicle accessories, and many other decorative uses.
Huawei aluminum's black aluminum tread plate are extruded aluminum panels with a raised tread pattern on one side, then painted in semi-gloss black for an edgy, modern look.
Our black aluminum plates are of high quality, clean cut, with smooth edges, and can be supplied with a semi-gloss black finish and PVC protection upon request.
Aluminum tread plate production process
Advantages and applications of aluminum plate
- Weather-resistant, 耐食性, easy-to-clean, non-slip: a variety of indoor and outdoor applications.
- 高強度, 低コスト, ductility and workability: for industrial and domestic use.
- Safe and resilient: can also be used as flooring, curtain wall panels for light building materials
- Attractive look and shiny finish: Many companies use it for floors or wainscoting to add some contrast or even accentuate certain parts of a space. One of many personal favorite applications for aluminum pedals is to use them as black diamond siding wall panels in car showrooms.
How to install black aluminum diamond plate wall panels
通常, the siding covers the area below the interior wall strip, one-third of the height of the wall (通常 0.91 m in the middle of the wall strip).
Tip: Remember this rule: measure twice, cut once.
Steps:
1. Measure to determine board size, then cut plywood into strips with a miter saw (you can also choose boards). The cut strips should be straight; A hand saw should also be used to trim the cut strips hidden at the edges.
2. Secure the nail board with an industrial nail gun, which can be rented from home construction stores. (You can also use a hammer: just use more force and pay attention to accuracy).
3. Secure the nails vertically above the panel and align the middle horizontal portion to separate the embedded panel
Black Color Aluminum Tread Plate
高強度.
Good for bending / 折りたたみ / cold forming
Our gloss black aluminium checker plate look great in both indoor & outdoor environments. Some of the most common uses for our black aluminium checker plate are: Protective / decorative wall claddings in shops, supermarkets & gyms. Step treads & kick plates for stairs & ドア. Decorative modifications to Land Rovers and other 4×4 off road vehicles. 床材, trade counters and work tops. Shop fittings, boats and other decorative panels.
Black Aluminum checker Plate sheet is used as scuff (kick) プレート, running boards, mud flaps and more. It cuts cleanly, leaving a smooth edge. checker plate's protective treads also help maintain its good looks and make it easy to keep clean.
Black anodized aluminum diamond plate.
Anodized coating offers a upgrading with two-step continuous coil anodizing. The state-of-the-art process for creating an anodized aluminum allows for perfectly colored sheets. With uniformity, 耐久性, and capability for exterior use, anodized aluminum sheets are an increasingly popular architectural design choice particularly for specialty decorative metal work in residential, commercial and industrial applications.
Application black color aluminum tread plate.
Its diamond texture gives excellent anti-skid properties, and it is often used in industrial settings for stairways, catwalks, スロープ, and walkways where wet conditions may otherwise pose a risk of sliding or falling. These non-slip properties also make it a common solution for ambulance floors and for the footplates of firetrucks, as well as domestic truck beds and trailer floors.
Diamond plate can also be used for wall panels, counter tops, tiling for other surfaces, and various architectural uses. Since it is easy to machine along with being robust and attractive, diamond plate tool boxes are another popular application. It is frequently employed to finish edges and corners of items made of other materials, where an extra element of wear-resistance is required. When fitting diamond plate in sheets or angles, care should be taken to select the right materials for fixing. Zinc-plated screws can be used, but aluminum rivets or other fixings may contribute to corrosion due to the differing electrolytic properties of the metals. If in doubt, seek advice and be sure to match materials appropriately to avoid long-term problem
Black aluminum diamond plate near me.
Black diamond plate that has non-stamped preformed treads. Made of an aluminum / manganese alloy, Black Aluminum Diamond Plate sheet is used as scuff (kick) プレート, running boards, mud flaps and more. It cuts cleanly, leaving a smooth edge. Diamond plate's protective treads also help maintain its good looks and make it easy to keep clean.