Test standard para sa patong aluminyo likawin base materyal

I. mga teknikal na tagapagpahiwatig:

Serial number	test items		test requirements
1	Supplier's test report		Komposisyon ng kemikal, tensile lakas, elongation, atbp. dapat umayon sa mga kaugnay na probisyon ng GB / t3880
2	T bend		2T does not crack and has no obvious deformation
3	Size deviation	Kapal / mm	± 0.01mm
		lapad / mm	+ 1mm

II. Board effect requirements:

1. The surface of the strip shall be well processed, uniform, flat and smooth.
2. The surface of the strip is not allowed to have obvious stripes, stripes, mga alon, pressure pits, yellow spots, mga mantsa sa langis, kaagnasian, pressure marks, creases, mga scratches, mga burr, pressure leaks, pulbos ng aluminyo, mga pattern, metal or non-metal pressing. Isang uri ng
3. Uneven thickness of strip is not allowed.

4. No joint is allowed for the strip.

III. appearance requirements:
1. The strip shall be tightly and completely rolled, without crack edge, thorn edge, bump and bruise. 2. No bird's nest or collapse is allowed.

IV. explanation of main product terms:

Defect name	Explain
Size deviation	Dimension deviation refers to the allowable deviation range of actual boundary dimension of non-ferrous metal processing products.
Uneven thickness	Uneven thickness refers to the uneven thickness of cross section and vertical section of plate, maghubad at foil.
alon	Wave refers to the wave shaped bending of the board, strip and foil along the length direction, which makes the surface lose straightness There are unilateral and bilateral waves, and there are also waves in the middle of the surface, which are usually in two ways: continuous waves and discontinuous waves.
Crack edge	Crack edge refers to continuous or intermittent cracks with different sizes on the edge. In severe cases, it is in the form of teeth or discontinuous triangle.
Cross striation	The striation refers to the fine or coarse striation on the surface along the vertical rolling direction, like the washing board, intermittent or circumferential Stage sex, serious is to touch with the hand has obvious feeling.
magaspang	Scratch refers to the irregular longitudinal and transverse scars on the surface of aluminum due to mechanical damage.
Crease	Creasing refers to the local irregular creasing on the surface of aluminum.
Oil stain (yellow spot, oil stain)	Oil stain refers to the spot, strip and sheet formed on the surface of aluminum material after drying due to the presence of oil or oil substances Continuous or discontinuous traces of oil film, called yellow spots.
Skin needling	Burr refers to the sharp and thin prick on the end (part) or surface of aluminum material.
Pressure pit (concave convex point)	Indentation refers to the appearance of different shapes, mga sukat, regular or irregular groups or local distribution on the surface of aluminum A punctate depression or projection of.
kaagnasian	Corrosion refers to the local corrosion phenomenon caused by chemical and electrochemical action between aluminum surface and external corrosive medium, The corrosion products with different colors are formed on the surface, which are spot, block and flake, commonly known as "surface oxidation".
Decorative pattern	Pattern refers to the regular pattern on the surface of aluminum during rolling, which makes the surface uneven seriously.
Metal or non-metal press in	The pressed object refers to the irregular distribution of metal or non-metal spoils which are obviously embedded on the aluminum surface and have nothing to do with the aluminum, There is a certain depth of pit on the surface after repair and scraping.
Pugad ng ibon	It refers to the local "V" shape on the end face of the aluminum material, which is caused by the uneven coiling or the loose and staggered coiling.
Aluminum powder	Aluminum powder refers to the small granular aluminum chips on the surface of the board which are easy to be wiped by a cloth.