طرق قياس لمعان صفائح الألمنيوم المرآة

تم قياس لمعان لوح المرآة باستخدام مقياس لمعان بزوايا هندسية مقدارها 20 درجة, 60° و 85 درجة. طريقة 60 درجة مناسبة لجميع نطاقات اللمعان, ولكن للطلاء شديد اللمعان أو شبه غير لامع, طريقة 20 درجة أو 85 درجة هي أكثر ملاءمة. تعمل طريقة 20 درجة على تحسين القدرة على التمييز للطلاء شديد اللمعان. إنها مناسبة للطلاءات ذات لمعان 60 درجة أكثر من 70 الوحدات. يمكن لطريقة 85 درجة تحسين القدرة على التمييز للطلاءات منخفضة اللمعان. انها مناسبة لمعان 60 درجة أقل من 30 الوحدات. طلاء.

طريقة الاختبار هذه غير مناسبة لتحديد لمعان الطلاءات الصبغية المحتوية على المعدن. يتكون مقياس اللمعان المستخدم في هذا الاختبار من جزء مصدر الضوء وجزء الاستقبال. يتم توجيه مصدر الضوء من خلال العدسة إلى شعاع ضوئي متوازي أو مركّز قليلاً باتجاه سطح الطلاء. يتم تركيز الضوء المنعكس بواسطة الجزء المستقبل من العدسة, تمتصه الخلية الكهروضوئية من خلال الحجاب الحاجز الميداني, ومن ثم قياسها بواسطة أداة قياس المتلقي. The value measured by the receiver meter is proportional to the luminous flux through the field of view of the receiver.

The gloss is measured by the test method, and the sample used must be a coating on a flat surface. If the substrate is slightly bent or partially uneven, the measurement result may be seriously affected. بالإضافة الى, the film thickness of the sample to be used must meet the specified requirements. The level of the surface to be inspected should be the same as that of the product. The surface must be clean and cannot be touched by hand because these factors will affect the measurement results.

In addition to the above-mentioned 20°, 60° and 85° geometric angles, some instruments also use geometric angles of 45° and 75° to determine the glossiness of the outer surface of the product. When measuring glossiness, the appropriate geometric angle should be chosen for measurement.

With high quality and competitive prices, سنكون دعمك القوي.
Inquiries of mirror sheet are welcome.