Wat is 6061 gelegeerde metalen aluminium plaat?
6061 gelegeerde metalen aluminium plaat belongs to 6000 serie aluminium plaat. Legering 6061 aluminiumplaten zijn een van de meest veelzijdige en meest gebruikte warmtebehandelbare legeringen. 6061 aluminiumlegering heeft een uitstekende corrosieweerstand, uitstekende bewerkbaarheid, lasbaarheid, and medium strength.Click know more about wat is 6061 aluminium plaat?
6061-aluminium plaat
6061 metal aluminum plate performance characteristics
6061 alloy aluminum sheet is a high-quality aluminum alloy product produced by the heat treatment pre-stretching process.Although its strength cannot be compared with the 2xxx series or 7xxx series, its magnesium and silicon alloys have many characteristics and have excellent processing properties and excellent welding characteristics.And electroplating, goede corrosiebestendigheid, hoge taaiheid, and no deformation after processing, the material is dense and defect-free, gemakkelijk te polijsten, easy to paint film, excellent oxidation effect, and other excellent features.
6061 aluminum sheet in different temper based on customer’s need, with a wide thickness range up to 600mm. In aanvulling, an extra-wide aluminum sheet with a maximum width of up to 2650mm, is an ideal material for curtain walls.
6061 T6 vs 6061 T651 aluminum alloy
6061 t6 aluminium plaat has a high strength to weight ratio making it ideal for any application where parts need to be light.
The difference between T6 and T651 is that in general, the internal stress of T6 will be larger and the processing will be deformed, the most suitable state for processing should be T651, die wordt uitgerekt op basis van T6 om interne stress te elimineren.
6061 aluminum plate factory drawing
T4 and T6 of 6061 Aluminium
6061 aluminum plate is one of the most widely used alloys in the heat-treatable alloy family. It can be used for bending under annealing conditions because the difference between yield strength and tensile strength is 10 Ksi and the elongation is up to 18%. Echter, bending capacity tends to decrease when increased to T4 and T6 tempering. It is not impossible to bend these hardened and tempered alloys, but great care is required and larger bending radii may be required to avoid cracking.And there is little difference between 6061 t6 aluminum sheet price and t4 price
Specialized application 6061 aluminium plaat
Representative applications include aerospace fixtures, electrical fixtures, and communications.
|
|
6061 aluminum alloy properties by temper
6061 bare aluminum sheet plate can be processed into varieties of tempers, such as O, T4, T6, T651, enz. Onder hen, T4 and T6 are the most common ones for their good machinability and weldability.
6061 aluminum sheet plate has a T651 temper, indicating it has been solution heat treated followed by a minimal stretching to reduce stresses in the material. The aluminum was then artificially aged to allow the alloying elements to precipitate out of the material giving our 6061-T651 aluminum plate immediate maximum strength.Here are five common tempers in 6061 aluminium plaat.6061 Aluminum Sheet Temper
- Heat treatment temper. 6061-T651 is a classic alloy processed by heat treatment, its state is suitable for further processing.
- F(vrij) woedeaanval. This temper of alloy has changeable mechanical properties.
- Gegloeide staat. This state applies to the alloys that are fully annealed to obtain the lowest strength.
- Work hardening temper. The strength of alloys can be enhanced by work hardening.
- Solution heat-treated temper. This temper is in an unstable state, it also means the alloy is in a natural aging stage.
6061 aluminum sheet physical properties table
| Alloy Temper | Treksterkte(MPa) | Opbrengststerkte(MPa) | Verlenging(%) |
|---|---|---|---|
| T4 | 255 | 152 | 23 |
| T6 | 345 | 290 | 13 |
| T651 | 289 | 242 | 10 |
| T451 | 350 | 210 | 25 |
Chemische samenstelling van 6061 aluminium plaat
| Element | En | Fe | Cu | Mn | mgr | Cr | Zn | Van | Ander |
| Inhoud | 0.4-0.8 | 0.7 | 0.15-0.4 | 0.15 | 0.8-1.2 | 0.04-0.35 | 0.25 | 0.15 | 0.15 |
6061 aluminum plate specification
| Technologie | warmgewalst ( gelijkstroom ), vorm |
| Common Thickness | 0.1mm ( dun ), 0.18mm, 0.4mm, 0.5mm, 0.6mm, 0.7mm, 0.8mm, 1mm, 1.2mm, 1.5mm |
| Other thicknesses | 1/16 inch, 1/8 inch ( .125 ), 1/4 inch, 3/8, 1 inch etc |
| Maat ( customized to cut ) | 16mmx1250mmx2500mm, 1.22m x 2.44m x 2mm |
aluminium plaat 6061
Wat is het verschil tussen 6061 En 6063 Aluminum Sheets?
6063 Aluminium plaat is another commonly used Aluminum grade, usually compared to 6061 Aluminium plaat. 6061 En 6063 are made of magnesium and silicon, which means they share many of the same properties. Het verschil tussen 6061 En 6063 is mainly in end-use. 6063 Aluminum Sheet is a common grade of customized extruded parts.
Echter, 6061 Aluminum Sheet is the most commonly used Aluminum in structural applications. Over het algemeen gesproken, the strength of the 6061 Sheet is higher than that of the 6063 Aluminium plaat (tensile strength range is 20 ~ 42KSI).
Aluminium 6061 leveranciers
In China, there are many aluminum 6061 leveranciers, and choosing high-quality aluminum 6061 leveranciers, takes time and energy, de 6061 aluminum sheet near me provided by Huawei Aluminum has medium strength, goede corrosiebestendigheid, lasbaarheid, en goed oxidatie-effect, and other characteristics. We hope that you can choose us among the many 6061 aluminum plate suppliers. Our product quality is guaranteed, delivery time is short, export arrangements are reasonable, and after-sales service can better meet your needs. Welcome to call our sales staff to provide you with high quality 6061 aluminium plaat.