5251 アルミシートの概要
5251 is a medium-strength metal known for its ductility and formability
This grade of Aluminium alloy is best known as a metal that can harden rapidly and is weldable easily.
の 5251 合金は耐食性が高いため人気があり、海洋で一般的に使用されています。, 沿岸環境.
5251 アルミニウム シート Tempering
5251 alloy aluminum sheet can be provided in different tempers to achieve specific mechanical properties and characteristics. The common alloys include:
H22 - Work hardened and partially annealed to a quarter hard state
H24 - Work hardened and partially annealed to a half hard state
H26 - Work hardened and partially annealed to a three-quarter hard state
○ – Wrought and fully annealed
The choice of temper for 5251 アルミニウム合金, or any aluminum alloy, depends on the specific requirements of your application. If you need a balance of strength and workability, H22 is a common choice. しかし, if higher strength is required at the expense of some formability, you might opt for a higher number, like H32 or H34. 逆に, if formability is more critical, you might consider a lower number or the "○" 気性. It's essential to consult with aluminum suppliers or manufacturers to select the right temper for your specific application.
5251 アルミシート
5251 アルミニウム シート 化学組成
| 銅 | ん | そして | 鉄 | マグネシウム | Cr | 亜鉛 | の | Ai | |
| Min | 0.15 典型的な | 0.1 | 0.2 | 0.5 典型的な | 1.7 | 0.15 典型的な | 0.15 典型的な | 0.15 典型的な | Balance |
| マックス | 0.5 | 0.6 | 2.4 |
5251 アルミニウム シート Welding
学年 5251 Aluminium alloy is a good weldable alloy.
When welding this alloy to itself it is recommended that use filler wire is 5356.
Filler wire 5356 is also recommended if you are welding 5251 alloys to an alloy of the 6000 シリーズ, 7000 series and the majority of 5000 シリーズ.
If you are welding either 5251 に 5005 または 5020 or an alloy of the 1000 series and the 3000 series of alloys then we suggest you use filler wire 4043.
Mechanical Properties of Aluminium Alloy 5251
The following parameter table refers to the authoritative website AZOM
Mechanical properties for aluminium alloy 5251 Soft O
| BS EN 485-2:2008 Sheet and Plate 0.2mm to 50.00mm |
|
|---|---|
| Property | Value |
| 耐力 | 60 Min MPa |
| 抗張力 | 160 - 200 MPa |
| ブリネル硬度 | 44 HB |
*Properties above are for material in the Soft O condition
Mechanical properties for aluminium alloy 5251 H22
| BS EN 485-2:2008 Sheet and Plate 0.2mm to 25mm |
|
|---|---|
| Property | Value |
| 耐力 | 120 Min MPa |
| 抗張力 | 190 - 230 MPa |
| ブリネル硬度 | 56 HB |
*Properties above are for material in the H22 condition
Mechanical properties for aluminium alloy 5251 H24
| BS EN 485-2:2008 シート & 皿 0.2mm to 12.5mm |
|
|---|---|
| Property | Value |
| 耐力 | 140 Min MPa |
| 抗張力 | 210 - 250 MPa |
| ブリネル硬度 | 62 HB |
*Properties above are for material in the H24 condition
Mechanical properties for aluminium alloy 5251 H26
| BS EN 485-2:2008 Sheet and Plate 0.2mm to 4mm |
|
|---|---|
| Property | Value |
| 耐力 | 170 Min MPa |
| 抗張力 | 230 - 270 MPa |
| ブリネル硬度 | 69 HB |
*Properties above are for material in the H26 condition
Physical Properties of Aluminium Alloy 5251
Physical properties for aluminium alloy 5251
| Property | Value |
|---|---|
| 密度 | 2.69 g/cm3 |
| 融点 | 625℃ |
| Modulus of Elasticity | 70 GPa |
| Electrical Resistivity | 0.44 × 10-6 Ω.m |
| 熱伝導率 | 134 W/m.K |
| Thermal Expansion | 25 × 10-6/K |
5251 alloy aluminum sheet/plate Applications
When it comes to aluminum sheet and plate products made from the 5251 合金, here are some key features and potential applications:
- Boats
- Panelling and pressings
- Marine structures
- Aircraft parts
- Vehicle panels
- Furniture tubing
- Silos
- Containers
の適用 5251 アルミシート
ファーウェイのアルミニウムの見積もり
| 日付 | LME | LME 週間価格 | 2023-04 LME平均 | 2023-04 SMM平均 |
| 2023-05-03 | 2330$ | 2333.3$ | 2341.00$ | 2712.08$ |
| 2023-05-02 | 2353$ | |||
| 2023-04-28 | 2342$ | |||
| 2023-04-27 | 2302$ | |||
| 2023-04-26 | 2339.5$ | |||
| 注意事項
1. 価格は次で更新されます 10:00 平日です. |
||||